Wood gasifying boiler ATTACK SLX

Special movable turbulators

The new boiler line ATTACK 7000 – SLX is equipped with the more efficient tubular exchanger flue gas – water. Special movable turbulators installed inside the exchanger serve to brake and to make the turbulent flow of the flue gas through the exchanger. Thereby it comes to higher heat transfer through the steel exchanger wall into the heating water. There is also option of the dry coat placed around the whole feeding chamber – increased protection against tar creation.

Dry coat – protection against tar creation

The volume of the SLX boiler´s feeding chamber is unique: 200 – 230 l and ensures longer burning on fuel load. This unique chamber also makes possible to load big wood logs – length of the feeding chamber is 690 and 790 mm and enables to load the wood logs of half-meter, which saves time by chopping the wood.

From technical view it is a boiler line with high efficiency, low flue gas temperature and more effective combustion process. Achieved efficiency of the ATTACK SLX boiler is up to 92 %. By installation of more efficient boiler of the ATTACK SLX line it comes to significant decrease of the operating costs, projected into the fuel savings, in comparison with less efficient boilers that combust same fuel.

From the social-wide view, it is an enviroment-friendly source, combusting wooden biomass, which is a kind of CO2-neutral fuel. Considering the harmful emissions, the average concentration of CO value in the flue gas, is during operation of the LAMBDA version under the level of 200 mg/m3 related to 10 % of O2. Under the valid European norm EN303-5, classifying the solid fuel boilers by efficiency and emissions to individual classes, the ATTACK SLX boiler (version LAMBDA) reaches 25 times lower concentration of harmful CO emisions in the flue gas incomparison with the allowed level of this norm!

Boiler regulation

Regulation PROFI

The ATTACK PROFI of the „PID“ generation is a kind of the advanced regulator, which enables to modulate the heat output in the ATTACK® wood gasifying boilers by regulation of the fan rotations. The well-readable display shows the necessary information and makes the boiler control easier.
The ATTACK SLX PROFI boiler brings the improvement of the PID regulation to control the fan rotations according to the temperature of water and flue gas and thereby to achieve the optimal efficiency. The regulator uses the advanced Fuzzy logic system for control to regulate the wood gasification system in the optimal way – to ensure the lowest heat loss possible.
The boiler equipped with the regulator ATTACK PROFI „PID” can control the heating system equipped with the following items: a pump for charging the accumulation tank, accumulation tank, circuit pump of heating circuits and room thermostat, by the lowest loss of heat energy possible. The regulator can be connected and set in the way enabling to control the pump of heating circuits and pump to charge the tank for domestic hot water.

Regulation LAMBDA TOUCH

ATTACK SLX LAMBDA Touch electronics consists of the well-readable touch display for quick access to the necessary information and settings. Software of electronics can be anytime upgraded by the USB key. The boiler can be connected to internet by the LAN cable and controlled from the distant point, even by the Smartphone.

The boiler is designed with reference to the user comfort. Thereby is the exchanger cleaned automatically by motor and turbulators. The boiler electronics can be extended with additional external modules to control the heating mixing circuits, D.H.W. tank, solar panels or other automatic boiler ATTACK LAMBDA Touch.

Properties – regulation PROFI

innovated electronics with fluent PID regulation of the fan rotations according to the flue gas temperature
Fuzzy logic – optimal regulation of the operating cycle of wood burning
increased boiler efficiency and stable burning
several options of control, including the pump to charge the accumulation tank, pump to charge the D.H.W. tank and the circuit pump of the heating circuits
option to control the circuit pump by thermostat
well-readable display indicating the operation of particular elements

Properties – regulation LAMBDA TOUCH

for boilers SLX and Wood&Pellet
smart design
new 7″ touch display
current status of the boiler
change of bolier parameters
internet connection configuration
remote service diagnostics
system update
the possibility of connection of external heat sources
suitable for complex heating control of buildings
equithermal regulation

Boiler parameters

		Boiler type
Parameter	Unit	SLX20	SLX25	SLX30	SLX35	SLX40	SLX45	SLX50	SLX55
Nominal output of the boiler	kW	20	25	30	35	40	45	50	55
Output range	kW	10 – 20	12,5 – 25	15 – 30	17,5 – 35	20 – 40	22,5 – 45	25 – 50	27,5 – 55
Area of the exchanger	m²	2,95				3,32
Volume of the feeding chamber	dm³	200				230
Dimensions of the feeding hole	mm	235×445
Prescribed chimney draught	Pa	23
Prescribed chimney draught	mbar	0,23
Max. working overpressure of the water	kPa	250
Pressure loss of the water (ΔT 10K)	kPa	1,9	2,1	2,4	2,7	3,9	4,5	5,2	6,1
Pressure loss of the water (ΔT 20K)	kPa	0,8	0,9	1,2	1,6	1,9	2,1	2,4	3,2
Weight of the boiler	kg	570				650
Diameter of the flue gas outlet	mm	150
Height of the boiler	mm	1472
Width of the boiler	mm	703
Depth of the boiler	mm	1337				1506
Depth of the feeding chamber	mm	690				790
Diameter of the riser pipe “E”	“	G 6/4″				G 2″
Diameter of the reverse “F”	“	G 6/4″				G 2″
Protection class	IP	21
Electrical input at the nominal output	W	42				78
Electrical input at the minimal output	W	31				52
Electrical input at the standby mode	W	< 15
Boiler efficiency	%	91,8	91,6	90,3	90,3	90,4	90,4	90,3	90,3
Boiler class	—	5
Temperature of the flue gas by the nominal output	°C	165	170	175	180	165	170	170	180
Temperature of the flue gas by the minimal output	°C	130	135	140	145	135	140	140	145
Mass flow of the flue gas by the nominal output	kg/s	0,018	0,02	0,021	0,023	0,027	0,029	0,031	0,033
Mass flow of the flue gas by the minimal output	kg/s	0,008	0,011	0,014	0,016	0,017	0,021	0,022	0,023
Max. noise level	dB	65
Class and type of the fuel	—	A, Wood logs with relative humidity of 12 % – max. 20 %, ∅ 50 – 150 mm
Average wood consumption	kg/h	5,2	6,5	7,8	9,1	10,4	11,7	13	14,3
Indicative consumption of the wood per season	—	1 kW = 1 m³
Max. length of logs	mm	650				750
Time of burning by nominal output *	h	8	7,2	6,5	5,8	6	5,1	4,6	4
Volume of the water in the boiler	l	117				136
Recommended volume of the accumulation tank	l	1000 – 2000				2500 – 3500
Voltage	V/Hz	~230/50
Range of the setting the temperature of the heating water	°C	65 ÷ 85
Capacity of the contacts of the boiler regulator (PROFI version)	—	2 A/ ~230 V